Steel Dump Bodies

The Warren FL 651 SERIES

The Warren 651H Series dump bodies are designed for mounting on heavy duty tandem and tri-axle truck chassis. Heavy duty features such as “Stacked Type” understructure, boxed type top rail, full depth corner posts and skirt, and 10 ga. ASTM A570 A-45 hi-tensile steel body with 1/4" hi-tensile steel floor and 7 ga. hi-tensile tailgate make this an ideal unit for general purpose hauling. A heavy duty frameless telescopic front mounted Warren hoist is standard.

Standard Specifications

• Construction: ASTM A570 A-45 hi-tensile steel
• Understructure: 4"- 5.4#/ft. channel crossmembers on 12" centers
• 7"- 9.8#/ft. channel longitudinals (12' - 14') FL-651
• 7"- 12.25#/ft. channel longitudinals (15' - 16') FL-651
• Floor: 1/4" hi-tensile
• Sides: 10 ga. steel w/4" x 4" x 1/8" sq. tube top rail
• 6" horizontal side brace
• 8" high front & rear board pockets/gussets
• Full depth rear corner posts & skirt
• Dirt shedding rub rails
• 10" wrap around front corner post
• Tailgate: 7 ga. hi-tensile, 6-panel braced
• 8" higher than sides
• Offset flame cut 11?4" hinge and 11?4" dia. latch pins
• Double lower sockets w/overhooks
• Air operated latch
• Bodyhead: 10 ga. steel die-formed horizontal braces
• Dog house w/access door
• Dimensions: Width—inside - 7'3", outside - 8'
• Lengths—14' thru 16'
• Capacities (cu. yd. - struck - sides/ends)
• 14'-10/12; 15'-11/13; 16'-13/15